Steering systems GPS
HAK offers ex work GPS steering discs for your new hoeing machine. Your GPS supplier will connect you to the GPS system. Ordering only a mounting frame is among the possibilities.

Steerable frame
In case of rough or uneven surfaces and corrective steering behind the tractor is demanded, a steerable frame is available which makes it possible for an additional driver to correct possible tracking deviations. The frame is fitted with beared rolls and can be blocked in case of ridging work. The steerable frame is available as either a mechanical or a hydraulic model.

Garford camera steering system
HAK is importer of the Robocrop 2 camera system for the Benelux. It is the very best available addition to your HAK hoeing equipment for working effectively, precisely and ultimately cost optimal. More >

Tools Ridging attachment
By using a HAK ridging attachment, weeding and ridging can be done in a single process. The ridging attachment is attached to the hoe’s handle and can be adjusted in depth and width in order to successfully divide the soil without clogging up. HAK supplies ridging attachments in various models and sizes.

Leaf protector
The leaf protector can be attached to hoeing frames in various sizes. It prevents damaging the crops and prevents the soil from clogging up. The discs are fitted with double sealed bearings and are easily adjustable in width, obliquity, depth and length.

Crust breaker
The crust breaker was developed in 1970 by HAK. From then on the product has been further developed and improved into a solid product. The crust breakers can be used to effortlessly break through hard surface, caused by weather influences. This allows the crops to germinate properly, which is essential considering the growing (quality) demands of the end-users. The working pressure is controlled by a spring and fully adjustable by means of a weight. The roll and the hinge are fitted with sealed bearings.

Row harrow
The HAK row harrows break up the soil around the roots of crops after they have been cut by a HAK hoe, rapidly drying out the weed. Small germinating weed will also be reached, delaying its growth. It will also terminate weed on the ridge in an early stage of germination. The HAK row harrow is supplied with teeth that are adjustable in width and the pressure can be adjusted by means of a weight. The row harrow is available in various editions and attachments, depending on the application and the row distance.

Hoe width adjustment
The HAK width adjustment, that has originally been custom designed for a client last year, can be adjusted easily without the use of any tools. The left and right side can be adjusted individually. The hoes constantly remain dependably parallel. The width adjustment can be used for rows of 30 to 75 centimetres and has an adjustment reach of 12 centimetres hoe width. The width can be easily viewed on the scale. The system is free of aberration and therefore functions very accurately.

Adjustable support wheel
These support wheels are fitted with spindle adjustments in order to easily and quickly adjust the height of the frame, which is demanded when increasing the pressure on the surface. The spindles are supplied with graduation, which represents the available height under the frame. The blocking bolt can be operated manually and also results in aberration free height adjustment during use. The wheel size is 4.80 centimetres.

XH-series steering discs
By using steering discs, the machine becomes stabile and follows the rows more accurately, even on sloping surfaces. Steering errors will therefore not directly influence the machine. Both the discs, as well as the hinges, are fitted with sealed bearings. The disc is adjustable and secured with a spring which pulls up the disc whenever rocks are present in the surface. Machines that are up to three metres wide can be fitted with one disc. When using wider machines or in case of strong sloping, a second disc can be added to offer more stability.

Torsion weeder
The HAK torsion weeder has specially been developed for the removal of weed in the row. In case of relatively small crops, the teeth can be set further apart. The surface in the row breaks open and makes it possible to control small weed. In case of larger crops, the teeth can be set closer together. Because of the travelling speed and resistance of the surface, the teeth will deviate sufficiently in order to prevent damage to the crops and to uproot the weeds properly. The HAK torsion weeder is characterised by two adjustable teeth. These teeth assure optimal result in just one process. The torsion weeder is available in various models.

Finger weeder
The finger weeder that has been developed by HAK is especially suitable for removing weeds in the row and is applicable to various types of crops. The finger weeder’s teeth can be set further apart in case of small crops, thereby breaking the soil open and resulting in proper development of the crops. The weeders teeth can be set closer together in case of bigger e.i. stronger crops. Because of the traveling speed, the uprooted weeds will be tossed from the row. When installing an additional HAK torsion weeder, it is important to remember to install the torsion weeder in front of the finger weeder, because they ridge in the opposite direction. The major advantage of installing a torsion weeder as an addition to the finger weeder is that an optimal result is obtained within a single working process.

Visibility fork
The visibility fork is fitted to the frame by means of a supplied tool grip. It can be adjusted in height and is secured by means of a spring-loaded hinge. The visibility fork will hinge backwards when coming in contact with the surface.